Acoustica SoundBoard 28 Plus
A premium fibre cement overlay for timber floors: 18 mm tongue-and-groove cement-based board laminated to a 10 mm acoustic resilient layer.
54 dBAirborne Rw + Ctr (laboratory)
50 dBImpact Ln,w (laboratory)
28 mmBoard thickness
0.72 m²Sheet · 600 × 1200 mm
Why SoundBoard 28 Plus
- Premium overlay solution for timber floors
- Suitable for new builds with timber joists, I-joists and metal web joists, and for conversions
- Suitable for underfloor heating
- Ready for laminates, carpets and carpet tiles
Applications
Domestic dwellings, offices, hotels, conference centres, leisure centres, schools, restaurants and showrooms.
Tested build-up
- Acoustica SoundBoard 28 Plus
- Existing or new subfloor
- Flat perimeter edging strip detail
- 235 mm I-joists or 240 mm solid joists at 600 mm centres
- 100 mm, 45 kg/m³ acoustic slab
- Resilient bars and 2 layers of 15 mm acoustic plasterboard
Specification
| Product code | 1289 |
|---|---|
| Board | 18 mm T&G cement-based board laminated to a 10 mm acoustic resilient layer |
| Sheet size | 28 × 600 × 1200 mm (0.72 m²) |
| Weight | 17.3 kg per sheet · 24.03 kg/m² |
| Laboratory test data | BRE Test Nos L216-017 and L216-018: airborne Rw + Ctr 54 dB, impact Ln,w 50 dB, on the construction shown above |
| Method of compliance | PCT / PT (Scotland) |
| Floor finishes | Ready for laminates, carpets and carpet tiles. Other finishes may need additional floor preparation. |
| Ancillary products | Flat edging strip 50 lm × 75 mm × 5 mm (1490) · Approved adhesive, 20 m² per litre (1196) · Acoustic sealant 310 ml (1027) |
Installation at a glance
Before you start
- Keep boards dry and acclimatise for at least 24 hours
- Subfloor or joists must be flat, dry and free from debris
- Lay as a floating floor, with no mechanical fixings
- Direct-to-joist: lay across the joists, with all board ends on a joist
Laying
- Fit 5 mm perimeter edging strip to all walls, uncompressed
- Fully glue all T&G joints with the recommended adhesive
- Stagger board joints and seal any minor gaps with acoustic sealant
- Leave a 5 mm sealed gap at main entrance thresholds
After laying
- Keep off the floor for 24 hours while the adhesive cures
- PVA adhesive won’t cure below 5 °C
- Penetrations through the floor and ceiling must be detailed site by site
Need technical advice or a price?
Our team can help with specification and installation queries.
Call 07818 542495Email usInformation is correct to the best of our knowledge. Please contact us before starting works for the latest information and confirmation of the specification.

