Acoustica UltraMat Overscreed 3mm
A 3 mm resilient acoustic mat laid over the screed, directly beneath the final floor finish, reducing impact sound transmission under a wide range of floor coverings. Produced from recycled car tyres and cork.
3 mmThickness
15 m²Per roll · 15 m × 1 m
Up to 33 dBAcoustic performance
0.33 togTog rating
Features
- Sustainable: made from cork and recycled car tyres
- Suitable with underfloor heating
- Resilient acoustic layer
Applications
Apartments, hotels, commercial developments and leisure developments.
Acoustic performance by floor finish
- Carpet tiles: 33 dB
- Sheet vinyl: 20 dB
- Glue-down LVT: 18 dB
- Click LVT: 17 dB
Specification
| Composition | Cork and recycled car tyres |
|---|---|
| Roll size | 15 m × 1 m (15 m²) |
| Thickness | 3 mm |
| Density | 600 kg/m³ |
| Roll weight | 27 kg |
| Tensile strength | >780 kPa |
| Elongation at break | >15% |
| Compression / recovery | 15% / >85% |
| Shore hardness | 40–60 Shore A |
| Thermal | Conductivity 0.09 W/mK · resistance 0.033 m²K/W · 0.33 tog |
| Operating temperature | −30 °C to 90 °C |
| Recommended adhesives | LVT: Mapei VS90 Plus, Uzin KE66 · Carpet tiles: Ultrabond Eco Tack, F.Ball F41 · Vinyl: Mapei VS90 Plus, F.Ball F44 · Linoleum: Mapei ECO 520 |
Installation at a glance
Preparation
- Screed or slab clean, dry, smooth, level and sound
- Check substrate moisture suits the floor finish and adhesive
- Acclimatise the mat on site for at least 24 hours
- Install between 18 °C and 35 °C, max 65% relative humidity
Laying
- Dry-lay first to confirm the layout
- Bond with a compatible adhesive and roll firmly
- Tightly butted joints, never overlapped
- Don’t bridge movement or expansion joints
Finishing
- Let the adhesive cure before laying the floor finish
- Protect from traffic and moisture until finished
- A small trial area is recommended if in doubt
Need technical advice or a price?
Our team can help with installation support and product queries.
Call 07818 542495Email usAlways confirm adhesive compatibility with the adhesive manufacturer. Information is correct to the best of our knowledge; please contact us before starting works for the latest information.

