Carpeted floors · Gripper riser

Acoustica Perimeter Gripper Risers

Risers that lift and isolate carpet gripper rods at the room edge, for use with Acoustica Easylay Matting 12mm and 15mm. They bring the gripper level with the matting and keep the carpet edge isolated from the base floor, so the acoustic performance carries right to the walls.

12 / 15 mmFor Easylay Matting 12mm and 15mm
14 mmFlat-head nails for fixing

Why use them

  • Brings the gripper rod level with the acoustic matting
  • Keeps the carpet edge isolated from the base floor
  • Carries the acoustic performance right to the walls

Fitting the risers

  1. Lay the Acoustica Easylay Matting first, then fit the risers around the room perimeter.
  2. Fit the risers tight to the edge of the acoustic matting for the best acoustic performance.
  3. Place the wooden gripper rods on the risers and fix with 14 mm flat-head nails, through the gripper rod and riser into the base floor.

Use with

Acoustica Easylay Matting, 12 mm or 15 mm, beneath carpet on timber and concrete floors.

Need technical advice or a price?

Our team can help with specification and installation queries.

Call 07818 542495Email us

Information is based on the manufacturer’s technical knowledge at the time of publication. Installation conditions, substrates and finishes may vary. Please contact us for technical guidance before starting works.

© Copyright 2026 - Acoustica Sound Proofing